For Big Block Chevrolet multi-engined all-out racing and jet drive boats. Built from heavy duty 16 gauge steel to withstand heavy abuse and racing conditions. Designed with ample bilge clearance. Full length windage tray and double trap door system provide complete oil control for increased power, reduced oil temperatures and consistent oil pressure. Increased oil capacity is required due to high loads placed on the engine by a jet drive and the resulting engine killing high oil temperatures. Features a water-tight, screw-in dipstick which keeps bilge water out of the pan.
** Does not include pickup, Must order separate **
Use puck-up #
18202 with Milodon #
18760 Oil pump or Melling #
M77HV Oil pump
Features:
- For Jet Boats running off of the flywheel end
- Big Block Chevrolet Gen V & VI will fit 4 1/2" stroke with most aluminum rods.
- Finish: Yellow Zinc Plate
- Includes Built In Windage Tray
- ** Does not include oil pickup. Must Order Separately **
- Use Oil Pickup # MIL-18202
- Pan Capacity is 10 quarts plus the filter
- Depth: 7-1/2" Front & Rear of motor
- 1/2" X 20 thread oil dip stick
- -12AN drain plug.
![]()
