![]()
American Turbine Model 309 Jet Drive with the B1007 Bearing (Serial # 0 to 25648)
| SYM. | Description | QTY. | Part Number |
| (1) | Bowl O-Ring | 1 | # O3101 |
| (2) | Wear Ring Liner | 1 | # WR6004 |
| (3) | Wear Ring Bronze
| 1 | # WR5000 |
| (3) | Wear Ring Stainless Steel
| 1 | # WR5000SS |
| (4) | Impeller | 1 | # IMA*** |
| (5) | Impeller Nut | 1 | # SH3507 |
| (6) | Bowl Snap Ring | 1 | # SC9201 |
| (7) | Bowl Seal | 2 | # SL2003 |
| (8) | Bowl Bearing | 2 | # B1502 |
| (9) | Bowl | 1 | # SCA9301 |
| (10) | Bowl Plug with Zert
| 1 | # SC9001 |
| (11) | Grease Zert | 1 | # SC8901 |
| (12) | Snap Ring | 1 | # SH1507 |
| (13) | Thrust Washer | 1 | # SH2005 |
| (14) | Thrust Bearing | 1 | # B1007 |
| (15) | Slinger Ring | 1 | # SH2507 |
| (16) | Pump Shaft | 1 | # SH1107 |
| (17) | Impeller Key | 1 | # SH3007 |
| (18) | Shim Kit | 1 | # SHK4007 |
| (19) | Bearing Cap Seal | 1 | # SL1007 |
| (20) | Engine Mount Ring | 1 | # SC4007 |
| (21) | Bearing Cap | 1 | # SC2007 |
| (22) | Suction Seal | 1 | # SL1507 |
| (23) | HHCS, 5/16-18 X 2"Bolt | 4 | # F05 18 HH |
| (24) | Lockwasher, 5/16 | 4 | # F05 LW |
| (25) | Locknut, 3/8-24 (Thin) | 2 | # F06 24-TL |
| (26) | Packing Follower (Pair) | 1 | # SC2507 |
| (27) | HHCS, 3/8-24 X 1-3/4" Bolt
| 2 | # F06 24 14 HH |
| (28) | Packing Ring | 4 | # SC3007 |
| (29) | Hand Hole Cover | 1 | # SC1501 |
| (30) | Hand Hole Cover O-Ring | 1 | # O1001 |
| (31) | Suction Piece 10-1/2 Bolt Circle | 1 | # SC1001 |
| (32) | HHCS, 1/2-13 X 1-1/2" Bolt
| 8 | # F08 13 12 HH |
| (33) | Barbed Connector, 3/8" NPT
| 1 | # SC4507 |
| (34) | Grease Zert | 1 | # SC8801 |
| (35) | Wing Nut 5/16-18 | 4 | # F05 18 WN |
| (36) | Lockwasher 5/16" | 4 | # F05 LW |
| (37) | Set Screw, 5/16-18 X 1-1/2" | 4 | # F05 18 12 SS |
![]()
