Knowledge Base:  

Knowledge Base : drive
Page of 1
Casale Split Case V-Drive Disassembly Procedure with ball bearings
Step 1. Remove the top bearing cap from the back side of the V-Drive Step 2. When the cap is removed, you will see a bearing with a snap ring groove in it. Warm the V-Drive case around the bearing wit
Turbo 400 Transmission Spline Drive Installation
When installing the Spine Drive make sure there is a pilot bushing in the crank. Install the dampner plate on the flywheel and use the spline drive to center the plate, then tighten the plate to the f