|
|
|
|
|
|
Oil Cooler Filter Nipple
|
|
|
Nipple for the Dan Olson Oil Cooler
Mounts the filter to the cooler
....
|
|
|
|
|
|
|
|
|
|
Dan Olson Oil Cooler Block L Bracket
|
|
|
L Bracket for the Dan Olson Oil Cooler to Block
Mounts the cooler to the block
Bolts not included
....
|
|
|
|
|
|
|
|
|
|
Dan Olson Oil Cooler O-Ring Kit
|
|
|
O-Ring Kit for the Dan Olson Oil Cooler
Replacement O-ring kit for the Dan Olson Oil Cooler
....
|
|
|
|
|
|
|
|
|
|
Oil Cooler End Cap
|
|
|
End Cap Housing for the Dan Olson Oil Cooler
These corrode over time and need replacement
Finish: Raw Casting
....
|
|
|
|
|
|
|
|
|
|
Oil Cooler Intermediate Housing
|
|
|
Intermediate Housing for the Dan Olson Oil Cooler
Fits between the block adapter and the oil cooler. These corrode over time and need to be replaced
Finish: Raw Casting
....
|
|
|
|
|
|
|
|
|
|
Oil Cooler Head Mark IV
|
|
|
Oil Cooler Head for the Dan Olson Oil Cooler
Chevrolet Mark IV
....
|
|
|
|
|
|
|
|
|
|
Chevrolet GEN 5 & 6 Bolt On Engine Oil Cooler Raw
|
|
|
Dan Olson Block Mounted Engine Oil Cooler for the Chevrolet Big Block GEN V & GEN VI Engine
There is no simpler way to cool the engine oil in your Big Block Chevy!
Overall Length: 19-3/4"
Diameter: 5"
Finnish: Unpolished Casting
Case Material: Aluminum
Core Material: Copper
*Notes* Will not work with engine mounts that use the automotive center bosses on the block.
....
|
|
|
|
|
|
|
|
|
|
BBC Wet Sump Aluminum Kickout Oil Pan V-Drive
|
|
|
Dan Olson Wet Sump Aluminum Kickout Oil Pan.
For V-Drive boats running a Big Block Chevy off the flywheel end of motor
*NOTE* Must use Tilton Type Starter for clearance
Features Right Side Kickout
Billet Front and Rear Seals
(3) Trap Doors
Side and Rear Windage Tray
Extended Oil Pickup Included
12 QT Capacity
Screw In Oil Dipstick
These pans are built to order and shipped directly from Dan Olson Racing to your door
Options available: Oil Temperature Bung
....
|
|
|
|
|
|
|
|
|
|
Chevrolet Mark IV Bolt On Engine Oil Cooler Polsihed
|
|
|
Dan Olson Block Mounted Engine Oil Cooler for the Chevrolet Big Block Mark IV Engine
There is no simpler way to cool the engine oil in your Big Block Chevy!
Overall Length: 19-3/4"
Diameter: 5"
Finnish: Polished
Case Material: Aluminum
Core Material: Copper
*Notes* Will not work with engine mounts that use the automotive center bosses on the block.
....
|
|
|
|
|
|
|
|
|
|
Chevrolet GEN 5 & 6 Bolt On Engine Oil Cooler Polsihed
|
|
|
Dan Olson Block Mounted Engine Oil Cooler for the Chevrolet Big Block GEN V or GEN VI Engine
There is no simpler way to cool the engine oil in your Big Block Chevy!
Overall Length: 19-3/4"
Diameter: 5"
Finnish: Polished
Case Material: Aluminum
Core Material: Copper
*Notes* Will not work with engine mounts that use the automotive center bosses on the block.
....
|
|
|
|
