Home > Steering Systems > V-Drive Steering Systems > Rudder Stuffing Boxes >

1" Billet Aluminum Rudder Stuffing Box With Bearing
Billet Aluminum Rudder Stuffing Box With Bearing 1"
Alternative Views:

Discount Price $199.00

Stock Status: In Stock
Availability: Usually Ships in 24 Hours
Product Code: D21E-003

Made from 6061 T6 aluminum with a machined finish. Designed to fit 1" diameter rudder shafts.
The stuffing box has a standard 3-5/16" square mounting flange. It is a direct replacement for your older style stuffing box. Mounting holes are not drilled as every hull has a different variety of hole sizes and patterns. All you have to do is transfer the existing hole locations in you hull to the rudder box and drill the size you need.

Fits all standard 1-1/2" diameter thru hull holes. The section that goes thru the bottom of the hull is 1-3/4" long to accommodate any hull thickness. Cut the length to fit.

Overall height of the stuffing box inside the boat is 2-1/8"

From the top of the stuffing box to the bottom features a snap ring for safety to help retain the 1" sealed bearing that is bored a few thousands larger than your rudder shaft for easy installation.

Next is an ample sized grease reservoir which is filled by the grease zerk located on the outside of the rudder box housing

A double lip grease cup seal is lightly pressed in as a second barrier to keep water out. The first water barrier is a 1/8" diameter o-ring that is below the grease cup seal.

Recommended Sea Going Epoxy putty for installation

Permalite Sea Goin Heavy Duty Poxy Putty 24 oz.
Our Price: $42.33

Permalite Sea Goin’ Heavy Duty Poxy Putty

Share your knowledge of this product. Be the first to write a review »