Categories

Manufactures
























Casale V-Drive Gear Promotion
Casale Bearings & Seals

UPS Shipping Information
Click Here for
Shipping Time Map



Like us on Facebook!







Home > V-Drive Components >
Struts
Sort By:
Page of 1
1" X 1-1/4" Aqua Lube Marine Bearing
1" X 1-1/4" Aqua Lube Marine Strut Bearing
Our Price: $18.75

Aqua Lube Water Lubricated Marine Strut Bearing. Cut in half and install each piece into strut

I.D.: 1"
O.D.: 1-1/4"
Length: 4-5/8"

...
1" X 1-3/8" Aqua Lube Marine Bearing
1" X 1-3/8" Aqua Lube Marine Strut Bearing
Our Price: $22.95

Aqua Lube Water Lubricated Marine Strut Bearing. Cut in half and install each piece into strut

I.D.: 1"
O.D.: 1-3/8"
Length: 4"

...
1-1/8" X 1-3/8" Aqua Lube Marine Bearing
1-1/8" X 1-3/8" Aqua Lube Marine Strut Bearing
Our Price: $23.25

Aqua Lube Water Lubricated Marine Strut Bearing. Cut in half and install each piece into strut

I.D.: 1-1/8"
O.D.: 1-3/8"
Length: 4"

...
Morse Marine Bearing 1" Shaft Size
Morse Marine Bearing 1" Shaft Size
Our Price: $68.75

Morse Marine Bearings are rubber lined and water lubricated. They require no seals and no oil or grease for lubrication. Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly. The high durability rubber liner is resistant to abrasion caused by particles in the water. The rubber is also oil and chemical resistant. The resilience of the rubber liner allows these bearings to dampen noise and vibration. The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility. The rigid outer shell is made of naval brass or non-metallic composite in the standard sleeve series. The standard flanged series outer shell is made of centrifugal cast naval brass. Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity.

Shaft Diameter: 1".
Outside Diameter: 1-1/4".
Length: 4".

....
Morse Marine Bearing 1" Shaft Size
Morse Marine Bearing 1" Shaft Size
Our Price: $71.44

Morse Marine Bearings are rubber lined and water lubricated. They require no seals and no oil or grease for lubrication. Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly. The high durability rubber liner is resistant to abrasion caused by particles in the water. The rubber is also oil and chemical resistant. The resilience of the rubber liner allows these bearings to dampen noise and vibration. The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility. The rigid outer shell is made of naval brass or non-metallic composite in the standard sleeve series. The standard flanged series outer shell is made of centrifugal cast naval brass. Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity.

Shaft Diameter: 1".
Outside Diameter: 1-3/8"
Length: 4".

....
9 Degree Whip Strut
9 Degree Whip Strut
Our Price: $73.50

A whip strut is used where the propeller shaft projects through the bottom of the boat. Required with flatter shaft angles or when the length of the unsupported shaft becomes excessive. Commonly used on most v-drive installations.
For 1" shaft; includes Aqua-Lube bearing

Bronze
Shaft Size: 1"
(4) Mounting holes

...
Morse Marine Bearing 1-1/8" Shaft Size
Morse Marine Bearing 1-1/8" Shaft Size
Our Price: $91.46

Morse Marine Bearings are rubber lined and water lubricated. They require no seals and no oil or grease for lubrication. Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly. The high durability rubber liner is resistant to abrasion caused by particles in the water. The rubber is also oil and chemical resistant. The resilience of the rubber liner allows these bearings to dampen noise and vibration. The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility. The rigid outer shell is made of naval brass or non-metallic composite in the standard sleeve series. The standard flanged series outer shell is made of centrifugal cast naval brass. Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity.

Shaft Diameter: 1-1/8".
Outside Diameter: 1-1/2"
Length: 4-1/2".

....
4130 Base Mounted Steel Strut
4130 Base Mounted Steel Strut
Our Price: $1,000.00

Manufactured from 4130 normalized steel. Custom built to your requirements.

Available in any degree or barrel size. 1/2 web with V-Grind on front and rear.
Turcite Bearings front and rear
Finish: Bare Steel
Add for chrome plating or Powder coat
Allow 5 weeks for delivery
Send your strut in for duplication

...