Categories

Manufactures
























Casale V-Drive Gear Promotion
Casale Bearings & Seals

UPS Shipping Information
Click Here for
Shipping Time Map



Like us on Facebook!







Home > Rule
Sort By:
Page of 1
Rule 360 GPH Bilge Pump
Our Price: $25.48

The Rule 360 provides outstanding quality and value. It is economically priced and designed for small boats.

3/4" (19mm) discharge outlet
12 Volts DC
Height - 3-1/2 inches
Width - 2-3/8 inches

....
Rule 500 GPH Bilge Pump
Rule 500 GPH Bilge Pump
Our Price: $31.79

The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity

High Flow – optimized impeller to provide greater flow at the same amperage
Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
Threaded Discharge - easier installation, easier maintenance

3/4'' (19mm) discharge outlet
12 Volts DC
Height - 3 1/2 (inches
Width - 2 3/8 (Inches )

....
Rule In-Line 3" Bilge Blower
Rule In-Line 3" Bilge Blower
Our Price: $39.11

Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers.

For International & US Markets.
Dimensions (H x W x D) 76 x 127 x 81 (mm)
Flow Rate (US gallons & litres) 135 CFM @ Open Flow.
Product Inlet Fitting 3" (76 mm) Ducting.
Product Outlet Fitting 3" (76 mm) Ducting

....
Rule In-Line 4" Bilge Blower
Rule In-Line 4" Bilge Blower
Our Price: $41.19

Rule In-Line Blower – 4" Ducting Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life.

Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers.
Dimensions (H x W x D) 102 x 152 x 106 (mm)
Flow Rate (US gallons & litres) 235 CFM @ Open Flow
Product Inlet Fitting 4" (102 mm) Ducting
Product Outlet Fitting 4" (102 mm) Ducting

....
Rule-A-Matic Plus Float Switch
Rule-A-Matic® Plus™ Float Switch
Our Price: $51.99

Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming.

14 gauge highly abrasive resistant marine grade wire, and a built-in test feature.
Designed for pumps drawing up to 20 Amps Model 40A
now includes a 2 year warranty.
Dimensions (L x W x H) 4 7/8 x 2 1/2 x 2 3/4 (inches)

....
Rule 800 GPH Bilge Pump
Rule 800 GPH Bilge Pump
Our Price: $54.59

Rule offers two 800 gph (3028 lph) styles - square and round versions. The square model (20F) offers 36 mounting variations as well as a gas resistant strainer base.

3/4" (19mm) discharge outlet
Height - 4 (inches )
Width - 2 7/8 (Inches )
12 Volts DC

....
Rule 1000 GPH Bilge Pump
Rule 1000 GPH Bilge Pump
Our Price: $56.09

The Rule 1000 is in a class by itself and is a popular choice among boat builders and boat owners alike. 36 mounting variations and a gas resistant strainer base make this one of Rule's most popular pumps.

1-1/8" (28.6mm) discharge outlet
Height - 4 (inches )
Width - 2 7/8 (Inches)
12 Volts DC

....
Rule 900 GPH Lo Profile Bilge Pump
Rule 900 GPH Lo Profile Bilge Pump
Our Price: $59.99

LoPro™ LP900D Bilge Pump is a low profile pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4". It features a threaded discharge nozzle to which you can attach either the included straight or 90° fitting. It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose can also swivel 360° for better routing.

....
Rule Automatic 900 GPH Lo Profile Bilge Pump
Rule Automatic 900 GPH Lo Profile Bilge Pump
Our Price: $80.89

LoPro™ LP900S Bilge Pump is a low profile pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4". It features a threaded discharge nozzle to which you can attach either the included straight or 90° fitting. It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose can also swivel 360° for better routing.

LoPro™ LP900S has two automated settings, enabling the pump to turn on when the water reaches either 1" or 1-3/4". In addition, the electronic automatic mode allows the pump to check for water every 2-1/2 minutes. If water is detected, the pump stays on until the water is removed. If no water is detected, then the pump turns off.
....
Rule 1500 GPH Bilge Pump
Rule 1500 GPH Bilge Pump
Our Price: $110.99

High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump.

1-1/8" (28.6mm) discharge outlet
12 Volts DC
Height: 6"
Width: 4-1/2"

....