Categories

Manufactures
























Casale V-Drive Gear Promotion
Casale Bearings & Seals

UPS Shipping Information
Click Here for
Shipping Time Map



Like us on Facebook!







Home > V-Drive Components >
Propellers and Shafting
Sort By:
Page of 1
Stainless Steel Propeller Cotter Pin
Propeller Cotter Pin
Our Price: $0.30

Stainless Steel Propeller Cotter Pin
Used for Inboard Propellers

Length: 2"
O.D: .125

....
tStainless Steel Prop Washer
Stainless Steel Prop Washer
Our Price: $0.68

3/4" Stainless Steel AN Washer for the propeller.

Used for V-Drive or Direct Drive Propeller.
Always use Anti-Seize compound when working with stainless Steel Fasteners

....
1" O-ring only
1" O-ring only
Our Price: $1.50

Extra replacement O-ring for the rudder stuffing box.

1" inside diameter.

...
1-1/8" O-ring only
1-1/8" O-ring only
Our Price: $1.50

Extra replacement O-ring for the rudder stuffing box.

1-1/8" inside diameter.

...
Stainless Steel Key Stock
Stainless Steel Key Stock
Our Price: $1.75

Stainless Steel Key Stock material Ideal for Split Couplers, Rudder and Propellers.

Available in 1/4" and 5/16"

Material: Stainless
Quantity: Sold per inch

...
Propeller Key Stainless Steel
Propeller Key Stainless Steel
Our Price: $1.75

Stainless Steel Propeller Keyway Used for Inboard Propellers

Length: 1-7/8" O.D: .25 Square


....
Flax Packing 3/16"
Flax Packing 3/16"
Our Price: $3.48

Replacement Flax Packing for stuffing boxes.

Braided flax fiber of the highest quality.
Finished braid is impregnated with waterproof hydraulic lubricant.
Service packing for the marine industry.
Diameter: 3/16"
Length: 8"

...
Flax Packing 1/4"
Flax Packing 1/4"
Our Price: $3.49

Replacement Flax Packing for stuffing boxes.

Braided flax fiber of the highest quality.
Finished braid is impregnated with waterproof hydraulic lubricant.
Service packing for the marine industry.
Diameter: 1/4"
Length: 9"

...
Flax Packing 5/16"
Flax Packing 5/16"
Our Price: $3.50

Replacement Flax Packing for stuffing boxes.

Braided flax fiber of the highest quality.
Finished braid is impregnated with waterproof hydraulic lubricant.
Service packing for the marine industry.
Diameter: 5/16"
Length: 11"

...
Stainless Steel Prop Nut
Stainless Steel Prop Nut
Our Price: $5.08

3/4 -10 thread Stainless Steel Nylox Nut.

Used for V-Drive or Direct Drive Propeller Lock Nut.
Sold: individually
Always use Anti-Seize compound when working with stainless Steel Fasteners

....
Stainless Steel Prop Nut Fine Thread
Stainless Steel Prop Nut Fine Thread
Our Price: $5.15

3/4 -16 fine thread Stainless Steel Nyloc Nut.

Used for V-Drive or Direct Drive Propeller Lock Nut.
Sold: individually
Always use Anti-Seize compound when working with stainless Steel Fasteners

....
Stainless Steel Prop Nut Kit
Stainless Steel Prop Nut Kit
Our Price: $6.00

Stainless Steel Prop Nut Kit. Comes with Nyloc nut, Cotter Pin, and Propeller Key Used for V-drive and Direct drive applications

Thread Size: 3/4 X 10

....
1" Seal
1" Seal
Our Price: $6.95

Extra replacement seal for the rudder stuffing box or shaft log seal.

1" inside seal shaft diameter.
Designed to be pressed into a 1.500 bore
Thickness: 5/16"

...
1-1/8" Seal
1-1/8" Seal
Our Price: $6.95

Extra replacement seal for the rudder stuffing box or shaft log seal .

1-1/8" inside seal diameter

...
1" Stainless Steel Safety Collar
1" Stainless Steel Safety Collar
Our Price: $14.00

Safety collar is made from Stainless Steel and designed for the Cavitation Plate transom bar, Rudder shaft, or Propeller Shaft

I.D.: 1"

...
Shaft Log Hose
Shaft Log Hose
Our Price: $14.50

Shaft Log Hose

Length: 3-1/2"
I.D: 1-3/4"
O.D: 2-1/4

...
1-1/8" Stainless Steel Safety Collar
1-1/8" Stainless Steel Safety Collar
Our Price: $15.00

Safety collar is made from Stainless Steel and designed for the Propeller Shaft, or Rudder Shaft.

I.D.: 1-1/8"

...
1" X 1-1/4" Aqua Lube Marine Bearing
1" X 1-1/4" Aqua Lube Marine Strut Bearing
Our Price: $18.75

Aqua Lube Water Lubricated Marine Strut Bearing. Cut in half and install each piece into strut

I.D.: 1"
O.D.: 1-1/4"
Length: 4-5/8"

...
1" Stainless Steel Strut Safety Collar
1" Stainless Steel Strut Safety Collar
Our Price: $22.25

Safety collar is made from Stainless Steel and designed to be installed in front of the strut.

ID: 1.007"
OD: 1.375"
Material: Stainless Steel
Quantity: Sold Individually.

...
1" X 1-3/8" Aqua Lube Marine Bearing
1" X 1-3/8" Aqua Lube Marine Strut Bearing
Our Price: $22.95

Aqua Lube Water Lubricated Marine Strut Bearing. Cut in half and install each piece into strut

I.D.: 1"
O.D.: 1-3/8"
Length: 4"

...
1-1/8" X 1-3/8" Aqua Lube Marine Bearing
1-1/8" X 1-3/8" Aqua Lube Marine Strut Bearing
Our Price: $23.25

Aqua Lube Water Lubricated Marine Strut Bearing. Cut in half and install each piece into strut

I.D.: 1-1/8"
O.D.: 1-3/8"
Length: 4"

...
1-1/8" Stainless Steel Strut Safety Collar
1-1/8" Stainless Steel Strut Safety Collar
Our Price: $25.25

Safety collar is made from Stainless Steel and designed to be installed in front of the strut.

ID: 1.132"
OD: 1.500"
Material: Stainless Steel
Quantity: Sold Individually.

...
1" Split Safety Collar Cad Plated
1" Split Safety Collar Cad Plated
Our Price: $27.75

Cad Plated Steel Propeller Shaft or Rudder Shaft 1" safety collar,

Gold Cad plated steel
Design makes installation easy.
No removal of shaft!

...
1-1/8" Split Safety Collar Cad Plated
1-1/8" Split Safety Collar Cad Plated
Our Price: $27.75

Cad Plated Steel Propeller Shaft or Rudder Shaft 1-1/8" safety collar,

Gold Cad plated steel
Design makes installation easy.
No removal of shaft!

...
1" Split Safety Collar Chrome
1" Split Safety Collar Chrome
Our Price: $29.75

Chrome Steel Propeller Shaft or Rudder Shaft 1" safety collar,

Chrome plated steel
Design makes installation easy. No removal of shaft!

...
1-1/8" Split Safety Collar Chrome
1-1/8" Split Safety Collar Chrome
Our Price: $29.75

Chrome Steel Propeller Shaft or Rudder Shaft 1-1/8" safety collar,

Chrome plated steel
Design make installation easy, No removal of shaft!

...
1" Split Stainless Steel Safety Collar
1" Split Stainless Steel Safety Collar
Our Price: $32.60

Our 1"" Stainless Steel safety collar is good for 1" cavitation control shafts, Propeller shafts, Rudder Shafts or any other use.

Split design makes it easy to install
I.D: 1"
Quantity: Sold Individually
Material: Stainless Steel

...
1-1/8" Split Stainless Steel Safety Collar
1-1/8" Split Stainless Steel Safety Collar
Our Price: $33.07

Our 1-1/8"" Stainless Steel safety collar is good for Propeller shafts, Rudder Shafts or any other use.

Split design makes it easy to install
I.D: 1-1/8"
Quantity: Sold Individually
Material: Stainless Steel

...
Morse Type Stuffing Box 1 inch
Morse Type Stuffing Box 1"
Our Price: $64.50

Corrosion free, pre-packed with beveled glands to force packing against shaft as it is tightened.

Shaft size: 1:
Packing size: 5/16"


...
Morse Type Stuffing Box 1-1/8 inch
Morse Type Stuffing Box 1-1/8"
Our Price: $65.50

Corrosion free, pre-packed with beveled glands to force packing against shaft as it is tightened.

Shaft size: 1-1/8:
Packing size: 5/16"

...
Morse Marine Bearing 1" Shaft Size
Morse Marine Bearing 1" Shaft Size
Our Price: $68.75

Morse Marine Bearings are rubber lined and water lubricated. They require no seals and no oil or grease for lubrication. Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly. The high durability rubber liner is resistant to abrasion caused by particles in the water. The rubber is also oil and chemical resistant. The resilience of the rubber liner allows these bearings to dampen noise and vibration. The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility. The rigid outer shell is made of naval brass or non-metallic composite in the standard sleeve series. The standard flanged series outer shell is made of centrifugal cast naval brass. Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity.

Shaft Diameter: 1".
Outside Diameter: 1-1/4".
Length: 4".

....
Morse Marine Bearing 1" Shaft Size
Morse Marine Bearing 1" Shaft Size
Our Price: $71.44

Morse Marine Bearings are rubber lined and water lubricated. They require no seals and no oil or grease for lubrication. Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly. The high durability rubber liner is resistant to abrasion caused by particles in the water. The rubber is also oil and chemical resistant. The resilience of the rubber liner allows these bearings to dampen noise and vibration. The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility. The rigid outer shell is made of naval brass or non-metallic composite in the standard sleeve series. The standard flanged series outer shell is made of centrifugal cast naval brass. Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity.

Shaft Diameter: 1".
Outside Diameter: 1-3/8"
Length: 4".

....
Split Sleeve Coupler Chrome Steel
Split Sleeve Coupler Chrome Steel 1"
Our Price: $75.00

Chrome Steel Split Sleeve Coupler for 1" V-Drive output shafts to 1" prop shafts.

Manufactured by Glenwood Marine
Finish: Chrome Plated
Material: Steel
Service: Light Duty

....
9° Self Aligning Shaft Log
9° Self Aligning Shaft Log
Our Price: $81.50

9° Polished Aluminum Self Aligning Shaft Log.

Base size 3-1/2" X 18-3/4"
Manufactured by Glenwood Marine

...
Morse Marine Bearing 1-1/8" Shaft Size
Morse Marine Bearing 1-1/8" Shaft Size
Our Price: $91.46

Morse Marine Bearings are rubber lined and water lubricated. They require no seals and no oil or grease for lubrication. Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly. The high durability rubber liner is resistant to abrasion caused by particles in the water. The rubber is also oil and chemical resistant. The resilience of the rubber liner allows these bearings to dampen noise and vibration. The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility. The rigid outer shell is made of naval brass or non-metallic composite in the standard sleeve series. The standard flanged series outer shell is made of centrifugal cast naval brass. Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity.

Shaft Diameter: 1-1/8".
Outside Diameter: 1-1/2"
Length: 4-1/2".

....
Universal Prop Puller
Universal Prop Puller
Our Price: $93.25

This cast Manganese bronze prop puller is one of the finest universal prop pullers made. Works equally well for two or three blade props.

Will accommodate propellers up to 13" in diameter.
Has a single hardened bolt. Length:6"

....
7° Self Aligning Shaft Log
7° Self Aligning Shaft Log
Our Price: $125.00

7° Cast Polished Aluminum Self Aligning Shaft Log.

Base size 3-1/2" X 20"
Hose size 1-3/4
Material: Aluminum
Finnish: Polished


...
Heavy Duty V-Drive Steel Prop Puller
Heavy Duty V-Drive Steel Prop Puller
Our Price: $130.00

This welded steel prop puller is one of the finest prop pullers made.

Will accommodate 1" and 1 - 1/8" Prop Shafts

Just tighten onto prop, then smack the back side with your mallet hammer!


....
Heavy Duty Split Sleeve Coupler Steel 1"
Heavy Duty Split Sleeve Coupler Steel 1"
Our Price: $250.00

5 Bolt Heavy Duty Steel Split Sleeve Coupler for 1" V-Drive output shafts to 1" prop shafts.
Manufactured by Casale, so you know its the best!

Material: Steel
Length: 4-3/4"
I.D: 1"
O.D: 2-1/4
Finish: Zinc Plated

...
Heavy Duty Split Sleeve Coupler Steel 1-1/8"
Heavy Duty Split Sleeve Coupler Steel 1-1/8"
Our Price: $250.00

5 Bolt Heavy Duty Steel Split Sleeve Coupler for 1-1/8" V-Drive output shafts to 1-1/8" prop shafts.
Manufactured by Casale, so you know its the best!

Material: Steel
Length: 4-3/4"
I.D: 1-1/8"
O.D: 2-1/4
Finish: Zinc Plated

...
Heavy Duty Step Split Sleeve Coupler Steel 1" - 1-1/8"
Heavy Duty Step Split Sleeve Coupler Steel 1" - 1-1/8"
Our Price: $275.00

5 Bolt Heavy Duty Steel Split Sleeve Coupler for 1" Shaft to 1-1/8" Shaft.
Manufactured by Casale, so you know its the best!

Material: Steel
Length: 4-3/4"
I.D: 1" One Side
I.D. 1-1/8" One Side
O.D: 2-1/4
Finish: Zinc Plated

...
Heavy Duty Step Split Sleeve Coupler Steel 1-3/8" - 1-1/8"
Heavy Duty Step Split Sleeve Coupler Steel 1-3/8" - 1-1/8"
Our Price: $275.00

5 Bolt Heavy Duty Steel Split Sleeve Coupler for 1-3/8" Shaft to 1-1/8" Shaft.
Manufactured by Casale, so you know its the best!

Material: Steel
Length: 4-3/4"
I.D: 1-3/8" One Side
I.D. 1-1/8" One Side
O.D: 2-1/4
Finish: Zinc Plated

...
17-4 Stainless Steel 1" Propeller Shaft
17-4 Stainless Steel 1" Propeller Shaft
Our Price: $295.00

High Performance propeller shafting for your performance v-drive boat
Good for up to 750HP

Prices start at 295.00. Additional lengths at additional cost. Pick the length that you need then add comments to the exact size that you want it machined to.

Precision machined with a standard propeller shaft taper
Milled for a 1/4" Key and threaded with 3/4" standard thread
Add 4-1/2" from end of strut to v-drive shaft for overall prop shaft measurement. This should give you between 1/2" to 3/8" clearance between your prop and strut
Yield Point: 130,000 to 135,000 PSI
Diameter: 1"
Key way size: 1/4"


....
Aquamet 17  Stainless Steel 1" Propeller Shaft
Aquamet 17 Stainless Steel 1" Propeller Shaft
Our Price: $450.00

High Performance propeller shafting for your performance v-drive boat
Good for up to 750HP

Add your length needed in the comments

Precision machined with a standard propeller shaft taper
Milled for a 1/4" Key and threaded with 3/4" standard thread
Add 4-1/2" from end of strut to v-drive shaft for overall prop shaft measurement. This should give you between 1/2" to 3/8" clearance between your prop and strut
Diameter: 1"
Key way size: 1/4"


....
Aquamet 22 Stainless Steel 1" Propeller Shaft
Aquamet 22 Stainless Steel 1" Propeller Shaft
Our Price: $600.00

High Performance propeller shafting for your performance v-drive boat
Good for up to 1100HP

Add your length needed in the comments

Precision machined with a standard propeller shaft taper
Milled for a 1/4" Key and threaded with 3/4" standard thread
Add 4-1/2" from end of strut to v-drive shaft for overall prop shaft measurement. This should give you between 1/2" to 3/8" clearance between your prop and strut
Diameter: 1"
Key way size: 1/4"


....