Categories

Manufactures
























Casale V-Drive Gear Promotion
Casale Bearings & Seals

UPS Shipping Information
Click Here for
Shipping Time Map



Like us on Facebook!







Home > V-Drive Components >
Cavitation Hardware
Sort By:
Page of 2
S.S. Cavitation Control Lever
S.S. Cavitation Control Lever

Cavitation Control Levers fit between you cavitation shaft and turnbuckles. Come in different lengths depending on the application
These are great replacements for the ones that break

Most sizes are in stock. The 1/8" sizes are special order

Machined from Stainless Steel
Measurement taken from end of lever to center of hole
Diameter: 3/4"

....
Stainless Ring Only
Stainless Ring Only
Our Price: $0.40

Replacement ring for use on the # GLEN-478 Pin & Rings

...
E Clip Only
E Clip Only
Our Price: $0.55

3/8" Stainless Steel replacement clip only

Fits our 3/8" Stainless Steel Pins

...
Plate Boss Screw
Plate Boss Screw
Our Price: $0.95

Stainless Steel Plate Boss Screw, Undercut to be used for 3/16" plate material

Thread size 5/16X18
Length: 1/2"

...
Stainless Steel Pin & Clips
5/16" Stainless Steel Pin & Clips
Our Price: $1.75

5/16" Stainless Steel Pin and clips for use between the cavitation plate turnbuckle, control arms, and plate bosses.

...
Stainless Steel Pin & Clips
3/8" Stainless Steel Pin & Clips
Our Price: $1.99

3/8" Stainless Steel Pin and clips for use between the cavitation plate turnbuckle, control arms, and plate bosses.

...
Stainless Steel Pin & Ring
3/8" Stainless Steel Pin & Ring
Our Price: $3.60

3/8" Stainless Steel Pin and ring for use between the cavitation plate turnbuckle, control arms, and plate bosses.

...
Stainless Steel Control Arm Bolt
Stainless Steel Control Arm Bolt
Our Price: $4.39

ARP Stainless Steel 12PT 3/8 X 24 X 1' bolts
The weakest link on any cavitation control arm is the bolt! Replace them with ARP Hardened bolts
These gorgeous stainless steel bolts from ARP are rated at 170,000 psi to provide a substantial extra margin of safety over Grade 8 and other hardware

Length: 1"
Material: Stainless Steel
Finish: Polished

...
1/2" Seal
1/2" Seal
Our Price: $4.50

Extra replacement seal for the cavitation rod thru hull.

1/2" inside seal diameter

...
Cavitation Thru Hull Hose
Cavitation Thru Hull Hose
Our Price: $9.50

1-1/4 ID replacement hose for the cavitation thru hull fitting

Length: 4.5 Inches
I.D.: 1.25 Inches

...
7/8" Stainless Steel Safety Collar
7/8" Stainless Steel Safety Collar
Our Price: $13.00

Safety collar is made from Stainless Steel and designed for the Cavitation Plate transom bar

I.D.: 7/8"

...
1" Stainless Steel Safety Collar
1" Stainless Steel Safety Collar
Our Price: $14.00

Safety collar is made from Stainless Steel and designed for the Cavitation Plate transom bar, Rudder shaft, or Propeller Shaft

I.D.: 1"

...
1/2" Split Stainless Steel Safety Collar
1/2" Split Stainless Steel Safety Collar
Our Price: $16.54

Our 1/2" Stainless Steel safety collar is good for cavitation rod stops.

Split design makes it easy to install
I.D: 1/2"
Quantity: Sold Individually
Material: Stainless Steel

...
Stainless Steel Female Clevis
Stainless Steel Female Clevis
Our Price: $18.50

Drilled and tapped 1/2-20 right hand thread.

Pin Size: 3/8"
Sturdy construction,
precision machined and polished

...
Stainless Steel Male Clevis
Stainless Steel Male Clevis
Our Price: $18.50

Drilled and tapped 1/2-20 right hand thread.

Pin Size: 3/8"
Sturdy construction,
precision machined and polished

...
5/16 Plate Boss Chrome Plated Bronze
5/16 Plate Boss Chrome Plated Bronze
Our Price: $18.75

Male Plate Bosses for 5/16" Turnbuckles precision machined and chrome plated bronze.

Manufactured by Glenwood Marine
Base Diameter: 1-3/4"
Turnbuckle Pin Size: 5/16"
Material: Bronze
Finish: Chrome Plated

...
3/8 Plate Boss Chrome Plated Bronze
3/8 Plate Boss Chrome Plated Bronze
Our Price: $18.95

Male Plate Bosses for 3/8" Turnbuckles precision machined and chrome plated bronze.

Manufactured by Glenwood Marine
Material: Bronze
Finish: Chrome Plated

...
Extended Stainless Steel Male Rod End
Extended Stainless Steel Male Rod End
Our Price: $21.40

Designed for the cavitation rod end for the Cavitation Control Arm.

Extra Long to give you that needed movement
Drilled and tapped 1/2-20 right hand thread.
Sturdy construction, precision machined

...
Swivel Eyebolt
Swivel Eyebolt
Our Price: $21.70

Used to run your 1/2 stainless steel cavitation rod thru your cavitation handle.

Allows it to pass thru using a safety collar on one end.
Swivels on your cavitation handle.
Material: Stainless Steel
Quantity: sold individually

...
Stainless Steel Female Rod End
Stainless Steel Female Rod End
Our Price: $21.80

Designed for the cavitation rod end mounted to the Pedal

Grove Machined to 3/8" to fit over foot pedal tab
Drilled and tapped 1/2-20 right hand thread.
Sturdy construction, precision machined
3" overall length

...
Cavitation Control Lever
Heavy Duty Cavitation Control Lever
Our Price: $26.00

Cavitation Control Levers fit between your cavitation shaft and turnbuckles. Come in different lengths depending on the application
The normal stainless shaft breaks Hi Performance Boats. These come with an ARP hardened bolt to cure that problem
Always use locktite to prevent seizing

Measured from center of hole to bottom
Machined from Stainless Steel
Comes with ARP Stainless Steel Fastener
Measurement taken from end of lever to center of hole

...
3/4" Split Stainless Steel Safety Collar
3/4" Split Stainless Steel Safety Collar
Our Price: $27.07

Our 3/4" Stainless Steel safety collar is good for 3/4" steering shafts or any other use.

Split design makes it easy to install
I.D: 3/4"
Quantity: Sold Individually
Material: Stainless Steel

...
Cavitation Thru Hull Replacement Seal Assy
Cavitation Thru Hull Replacement Seal Assy
Our Price: $29.50

Replacement bushing and seal assembly for the 1/2 cavitation rod thru hull.
If your brass bushing is worn, just replacing the seal wont cure the problem. Replace the assembly.

I.D: 1/2"
O.D: 1-1/4

...
9" Cavitation Compression Return Spring
9" Cavitation Compression Return Spring
Our Price: $30.00

Replacement Compression Type return spring for your Cavitation plates.

Overall Length: 9:
I.D.: 13/16"
Wire Size: .225
Material: Spring Steel
Finnish: Zink Plated
Quantity: Sold Individually

....
7/8" Split Stainless Steel Safety Collar
7/8" Split Stainless Steel Safety Collar
Our Price: $31.00

Our 7/8" Stainless Steel safety collar is good for 7/8" cavitation control shafts or any other use.

Split design makes it easy to install
I.D: 7/8"
Quantity: Sold Individually
Material: Stainless Steel

...
8" Cavitation Return Spring
8" Cavitation Return Spring
Our Price: $31.40

Replacement return spring for your Cavitation plates.
Normally used in Drag Boats

Overall Length: 8-1/2"
Material: Spring Steel
Finnish: Zink Plated
Wire Size: .180
Quantity: Sold Individually

....
1" Split Stainless Steel Safety Collar
1" Split Stainless Steel Safety Collar
Our Price: $32.60

Our 1"" Stainless Steel safety collar is good for 1" cavitation control shafts, Propeller shafts, Rudder Shafts or any other use.

Split design makes it easy to install
I.D: 1"
Quantity: Sold Individually
Material: Stainless Steel

...
Aluminum Plate Pad Flat Two Bolt
Aluminum Plate Pad Flat Two Bolt
Our Price: $34.00

Polished billet aluminum four bolt Cavitation plate pad.

Accepts a 3/8" diameter pin,
Features a press in stainless steel bushing in the pin area.
3/8 Pin size
2" X 2" Base.
Two taped holes on bottom for mounting

...
Aluminum Plate Pad Flat Four Bolt
Aluminum Plate Pad Flat Four Bolt
Our Price: $36.80

Polished billet aluminum four bolt Cavitation plate pad. Accepts a 3/8" diameter pin,

Features a press in stainless steel bushing in the pin area.
3/8 Pin size
2" X 2" Base
1-1/4" Hole Centers
Polished Finish
Stainless Bushing

...
12" Cavitation Return Spring
12" Cavitation Return Spring
Our Price: $41.75

Replacement return spring for your Cavitation plates.
These are monster springs. If you are having a problem with your plate sucking down, then these will help

Overall Length of spring: 14-1/4"
Lengh incluces loops
Material: Spring Steel
Wire Size: .195
Finnish: Zink Plated
Quantity: Sold Individually

....
10" Cavitation Return Spring
10" Cavitation Return Spring
Our Price: $41.75

Replacement return spring for your Cavitation plates.
Medium duty springs, great for a ski boat

Overall Length of spring: 12-1/4"
Lengh incluces loops
Material: Spring Steel
Wire Size: .137
Finnish: Zink Plated
Quantity: Sold Individually

....
Billet Aluminum Cavitation Thru Hull Seal Assy.
Billet Aluminum Cavitation Thru Hull Seal Assy.
Our Price: $42.00

Replacement Cavitation thru hull seal assembly for your cavitation rod. Machined from billet 6061-T6 aluminum with machine finish

They have two double lip cup seals with a gap in between them for grease. A snap ring on the front for containment and safety. Also an O-ring on the water side for a total of 3 water seals!

Hose Size: 1-1/4"
Shaft size: 1/2"

...
7/8" Chrome Bronze Transom Block
7/8" Chrome Bronze Transom Block
Our Price: $43.65

Chrome Bronze Cavitation Plate Transom Block.

7/8" Control Shaft
Base width: 1-1/8"
Mounting Holes Center to Center: 2-1/16"
Finish: Chrome Plated
Brass Bushing

...
7/8" Transom Block
7/8" Transom Block
Our Price: $50.00

Polished billet aluminum Cavitation Plate Transom Block.

Center of cavitaion shaft to transom: 2-1/8"
Mounting Holes center to center: 2"
7/8" Control Shaft
Width: 1"
Height: 3"
Finish: Polished Aluminum
Delrin Bushing

...
Aluminum Plate Pad Flat Two Bolt Angled
Aluminum Plate Pad Flat Two Bolt Angled
Our Price: $65.00

Polished billet aluminum two bolt Cavitation plate pad.

Accepts a 3/8" diameter pin,
Features a press in stainless steel bushing in the pin area.
3/8 Pin size
2" X 2" Base.
Two taped holes on bottom for mounting
Custom machined to your bottom angle.
Special Order only
Call with bottom degrees

...
7/8" Cavitation Control Shaft Lever Chrome
7/8" Cavitation Control Shaft Lever Chrome
Our Price: $75.50

Cast from 70,000 Manganese Bronze and then chrome plated. Precision machined for a 7/8" Diameter control shaft
Includes stainless clevis for a 1/2" control rod

Center to Center: 5.250 inches
Material: Bronze
Finish: Chrome Plated
Hole Size: 7/8"
Keyway size: 3/16"


....
90° Round Thru Hull
90° Round Cavitation Rod Thru Hull
Our Price: $87.50

Cast Round thru hull fitting for adjustable cavitation plates. 90 degree for straight transoms. Chrome brass outer finish.

Comes with Brass seal assembly for a 1/2" cavitation rod

Uses a 1-1/4 hole

Manufactured by Glenwood Marine


...
Single Spring Return Assembly
Single Spring Return Assembly
Our Price: $97.50

Single Spring Assembly for the cavitation control rod.

Single Chrome spring mounted on Stainless Steel bushings.
Just mount to your angle aluminum plate.
Polished Aluminum rod clamp.
Machined for 1/2" Control rod

...
7/8" Control Arm
7/8" Control Arm Billet Aluminum
Our Price: $100.00

Polished billet aluminum Cavitation Plate control arm.

7 1/2" Overall length, 5 1/4" center to center.
7/8" Control Shaft
1" Wide
3/16th key way slot
Polished Finish

...
1" Control Arm
1" Control Arm Billet Aluminum
Our Price: $100.00

Polished billet aluminum Cavitation Plate control arm.

7 1/2" Overall length,
5 1/4" center to center.
1" Control Shaft 1" Wide 1/4" key way slot
Polished Finish

...